 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Ordering number : ENA0113 VEC2307 VEC2307 Features * * * * P-Channel Silicon MOSFET General-Purpose Switching Device Applications The best suited for load switches. 4V drive. Composite type, facilitaing high-density mounting. Mount height 0.75mm. Specifications Absolute Maximum Ratings at Ta=25C Parameter Drain-to-Source Voltage Gate-to-Source Voltage Drain Current (DC) Drain Current (Pulse) Allowable Power Dissipation Total Dissipation Channel Temperature Storage Temperature Symbol VDSS VGSS ID IDP PD PT Tch Tstg PW10s, duty cycle1% Mounted on a ceramic board (900mm2!0.8mm)1unit Mounted on a ceramic board (900mm2!0.8mm) Conditions Ratings --30 20 --2 --8 0.9 1.0 150 --55 to +150 Unit V V A A W W C C Electrical Characteristics at Ta=25C Parameter Drain-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance Static Drain-to-Source On-State Resistance Input Capacitance Output Capacitance Reverse Transfer Capacitance Symbol V(BR)DSS IDSS IGSS VGS(off) yfs RDS(on)1 RDS(on)2 Ciss Coss Crss Conditions ID=--1mA, VGS=0V VDS=-30V, VGS=0V VGS=16V, VDS=0V VDS=-10V, ID=--1mA VDS=-10V, ID=-1A ID=--1A, VGS=-10V ID=--0.5A, VGS=-4V VDS=-10V, f=1MHz VDS=-10V, f=1MHz VDS=-10V, f=1MHz Ratings min --30 --1 10 --1.2 1.2 2.0 130 225 200 47 32 170 320 --2.6 typ max Unit V A A V S m m pF pF pF Marking : CH Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN D1505PE MS IM TB-00001874 No. A0113-1/4 VEC2307 Continued from preceding page. Parameter Turn-ON Delay Time Rise Time Turn-OFF Delay Time Fall Time Total Gate Charge Gate-to-Source Charge Gate-to-Drain "Miller" Charge Diode Forward Voltage Symbol td(on) tr td(off) tf Qg Qgs Qgd VSD Conditions See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. VDS=--10V, VGS=-10V, ID=--2A VDS=--10V, VGS=-10V, ID=--2A VDS=--10V, VGS=-10V, ID=--2A IS=--2A, VGS=0V Ratings min typ 7.2 2.9 21 8.7 5.5 0.98 0.82 --0.85 --1.5 max Unit ns ns ns ns nC nC nC V Package Dimensions unit : mm 7012-002 0.25 0.3 0.15 Electrical Connection 8 8 7 65 7 6 5 0.25 1 2 2.9 3 0.65 4 1 : Source1 2 : Gate1 3 : Source2 4 : Gate2 5 : Drain2 6 : Drain2 7 : Drain1 8 : Drain1 1 2 3 4 2.8 2.3 Top view 0.75 1 : Source1 2 : Gate1 3 : Source2 4 : Gate2 5 : Drain2 6 : Drain2 7 : Drain1 8 : Drain1 SANYO : VEC8 Switching Time Test Circuit 0.07 VIN 0V --10V VIN VDD= --15V D PW=10s D.C.1% ID= --1A RL=15 VOUT G VEC2307 P.G 50 S No. A0113-2/4 VEC2307 0V --2.0 ID -- VDS --5. 0V --4 .5V --4 ID -- VGS VDS= --10V --8. 0V --6. 0 V --10 . --4 .0 V Drain Current, ID -- A VGS= --3.0V Drain Current, ID -- A --1.5 --3 --1.0 --2 --0.5 --1 0 0 --0.1 --0.2 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 --0.9 --1.0 0 0 --0.5 --1.0 --1.5 --2.0 --2.5 --3.0 --3.5 --4.0 --4.5 Drain-to-Source Voltage, VDS -- V 500 IT10320 500 RDS(on) -- VGS Gate-to-Source Voltage, VGS -- V 25 C Ta= 75 C --25 C IT10321 RDS(on) -- Ta Ta=25C Static Drain-to-Source On-State Resistance, RDS(on) -- m 400 350 300 250 200 150 100 50 0 0 --2 --4 --6 --8 --10 IT10322 Static Drain-to-Source On-State Resistance, RDS(on) -- m 450 450 400 350 300 250 200 150 100 50 0 --60 --40 --20 0 20 40 60 80 100 120 140 160 ID= --0.5A --1.0A VG .5A, = --0 ID .0A I D= --1 --4 S= V , V GS= --10V Gate-to-Source Voltage, VGS -- V 7 yfs -- ID Ambient Temperature, Ta -- C 5 3 2 --1.0 7 5 3 2 --0.1 7 5 3 2 IT10323 IS -- VSD VGS=0V Forward Transfer Admittance, yfs -- S 5 3 2 VDS= --10V Source Current, IS -- A 1.0 7 5 3 2 = Ta --2 C 75 C 25 --0.01 7 5 3 2 0.1 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 --0.001 --0.2 --0.4 Ta= 7 --0.6 C 5 25 C --25 C --0.8 5C --1.0 --1.2 IT10325 Drain Current, ID -- A 2 100 IT10324 3 2 SW Time -- ID Ciss, Coss, Crss -- VDS f=1MHz Ciss Diode Forward Voltage, VSD -- V VDD= --15V VGS= --10V Switching Time, SW Time -- ns 7 Ciss, Coss, Crss -- pF 5 3 2 10 7 5 3 2 1.0 --0.1 100 7 5 td(off) td(on) tf Coss 3 2 Crss tr 10 2 3 5 7 --1.0 2 3 5 IT03229 0 --5 --10 --15 --20 --25 --30 IT03230 Drain Current, ID -- A Drain-to-Source Voltage, VDS -- V No. A0113-3/4 VEC2307 --10 --9 VGS -- Qg VDS= --10V ID= --2A Drain Current, ID -- A 2 --10 7 5 3 2 --1.0 7 5 3 2 --0.1 7 5 3 2 ASO IDP= --8A ID= --2A 10 10s Gate-to-Source Voltage, VGS -- V --8 --7 --6 --5 --4 --3 --2 --1 0 0 1 2 3 4 5 6 IT03231 10 m s 0 s 10 1m DC 0m s s op er ati on Operation in this area is limited by RDS(on). Ta=25C Single pulse Mounted on a ceramic board (900mm2!0.8mm) 23 5 7 --0.1 23 5 7 --1.0 23 5 7 --10 23 5 --0.01 --0.01 Total Gate Charge, Qg -- nC 1.2 Drain-to-Source Voltage, VDS -- V IT10326 PD -- Ta Mounted on a ceramic board (900mm2!0.8mm) Allowable Power Dissipation, PD -- W 1.0 0.9 0.8 To t al 0.6 di 1u ss ip nit ati on 0.4 0.2 0 0 20 40 60 80 100 120 140 160 Ambient Temperature, Ta -- C IT10327 Note on usage : Since the VEC2307 is a MOSFET product, please avoid using this device in the vicinity of highly charged objects. Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of December, 2005. Specifications and information herein are subject to change without notice. PS No. A0113-4/4 |
Price & Availability of VEC2307
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |